E-glass Fiberglass Chopped Strand Mat (CSM)

E-glass Fiberglass Chopped Strand Mat is made from E-glass low size chopped strands around *0mm in length, bonded together by powder or emulsion binder which makes it perfectly suitable for use with polyester resins. It is suitable for application by hand lay-up ,mold process, to make FRP sheets and panels, vehicles, boat hulls, cooling towers, etc.

Product Characteristics:

a. High smoothness of the laminate surface

b. Good compatibility with vinylester, epoxy resins

c. Good drapability

d. Highly suitable for good surface appearance

e. Highly suitable for first layer with gel coat

Technical Parameters:

Product Parameter:

Chopped Strand Mat is wound onto a paper tube which has an inside diameter of *0mm. The roll outside diameter is approximately **5mm. Each roll is wrapped up in plastic film and then packed in a carton. The rolls are stacked horizontally or vertically onto pallets. All pallets are stretch wrapped and strapped to maintain stability during transport.

Storage:

Chopped strand mat should be stored in its original packaging in a dry, cool and water-proof place. The recommended conditions are at temperatures from *5 to *5°C and humidity between *5 and *5%. To ensure safety and avoid damage to the product, the pallets should not be stacked more than three layers high, when the pallets are stacked in 2 or 3 layer, care should be taken to correctly and smoothly move the top pallet.

Application: